Fusion M2 32/40
Technical specifications of our Fusion M2 32 and M2 40 systems. The Fusion M2 32 and M2 40 are legacy systems of Epilog Laser. See specifications on these unit below.
|
Laser Machine:
|
FUSION M2 32 |
FUSION M2 40 |
|
|
Work Area:
|
32″ x 20″ (812 x 508 mm) |
40″ x 28″ (1016 x 711 mm) |
|
|
Material Thickness:
|
CO2: 13.5″ (343 mm) (2″ lens) Fiber: 12.5″ (318 mm) (3″ lens) Dual Source: 12.5″ (318 mm) (3″ lens) |
CO2: 13.25″ (337 mm) (2″ lens) Fiber: 12.25″ (311 mm) (3″ lens) Dual Source: 12.25″ (311 mm) (3″ lens) |
|
|
Laser Tube Wattages:
|
CO2: 30, 40, 50, 60, 75, or 120 watts Fiber: 30 or 50 wattsDual source: CO2 50, 60, or 75 watts; Fiber 30 or 50 watts |
CO2: 30, 40, 50, 60, 75, or 120 watts Fiber: 30 or 50 wattsDual source: CO2 50, 60, or 75 watts; Fiber 30 or 50 watts |
|
|
Laser Source:
|
State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. | ||
|
Intelligent Memory Capacity:
|
Multiple file storage up to 128 MB. | ||
|
Air Assist:
|
Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface. | ||
|
Laser Dashboard:
|
The Laser Dashboard™ controls your Epilog Laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages. | ||
|
Red Dot Pointer:
|
Since the laser beam is invisible, the Red Dot Pointer on the Fusion Laser allows you to have a visual reference for locating where the laser will fire. | ||
|
Relocatable Home:
|
When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Fusion Series Lasers. | ||
|
Operating Modes:
|
Optimized raster, vector or combined modes. | ||
|
Motion Control System:
|
High-speed Brushless DC Servo Motors. | ||
|
X-Axis Bearings:
|
Ground and polished stainless steel Long-Lasting Bearing System. | ||
|
Belts:
|
Kevlar (x-axis) and Steel Cord (y-axis) belts. | ||
|
Resolution:
|
User controlled from 75 to 1200 dpi. | ||
|
Speed and Power Control:
|
Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color. | ||
|
Print Interface
|
10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10. | ||
|
Size (W x D x H):
|
52.5″ x 33.75″ x 40.75″ (1334 x 857 x 1035 mm) 37.75″ (959 mm) deep with exhaust plenum. |
60.5″ x 41.25″ x 42.25″ (1537 x 1048 x 1073 mm) 43″ (1092 mm) deep with exhaust plenum. |
|
|
Weight:
|
500 lbs (227 kg) Dual Source: 536 lbs (243 kg) |
643 lbs (292 kg) Dual Source: 679 lbs (308 kg) |
|
|
Electrical Requirements:
|
Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. | ||
|
Maximum Table Weight:
|
Fusion 32/40: 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting. | ||
|
Ventilation:
|
650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration system is required. There are two output ports, 4″ (102 mm) in diameter. | 650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration system is required. There are two output ports, 4″ (102 mm) in diameter. | |