Technical specifications of our Legend 36EXT. The 36EXT is a legacy system of Epilog Laser. See specifications on this unit below.
Engraving Area | 36" x 24" (914 x 610 mm) |
|
Maximum Material Thickness | 12" (305 mm) | |
Maximum Material Thickness with Table Revmoved | 14" (355 mm) | |
Laser Wattage | 30, 40, 50, 60, 75 or 120 watts | |
Laser Source | State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. | |
Intelligent Memory Buffer | Store unlimited files up to 64MB. Rolling buffer allows files of any size to be engraved. | |
Permanent Job Save at the Laser | Store up to 10 jobs at the laser, each up to 2 MB in size. | |
Air Assist | Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface. | |
Laser Dashboard | The Laser Dashboard controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages. | |
Red Dot Pointer | Since the laser beam is invisible, the Red Dot Pointer on Epilog's Laser Systems allow you to have a visual reference for locating where the laser will fire. | |
Relocatable Home | When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Moveable Home Position feature on the Legend Series. | |
Operating Modes | Optimized raster, vector or combined modes with engraving and cutting in one job. | |
Motion Control System | High-speed, continuous-loop, DC brushless servomotors using linear and rotary encoder technology for precise positioning. | |
X-Axis Bearings | Ground and polished stainless steel long-lasting bearings. | |
Print Interface | 10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7. | |
Size (W x D x H) | 50.5" x 33" x 42" (1283 x 838 x 1067 mm) - (120 watt: 36"/914 mm deep). | |
Weight | 440 lbs (199 kg) | |
Electrical Requirements | Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. | |
Super-Silent Cooling Fans | 64 db (not available on the 120 watt). | |
Ventilation | External exhaust to the outside or internal filtration system required. There are two output ports, each 6" in diamter. | |
Laser System Classification | Class 2 Laser Product - 1 mW CW Maximum 600-700 nm. |
Have a question we can help you with?
2019 © Epilog Laser. ALL Rights Reserved. Privacy Policy | Choose Your Country | Sitemap